DIY Colour-Burst Gift Tags

DIY Colour-Burst Gift Tags

This post was first published in Corinna’s monthly Gift Wrapping Newsletter. Sign up here!

When you’re dying Easter eggs this year, why not whip up a batch of these vibrant gift tags at the same time? The intense hues come not from paint, but food colouring; when a drop of the dye hits wet paper, it “bursts” into a feather-edged circle, creating an exuberant base for cheerful messages.

DIY Colour-Burst Gift Tags, materials

Materials + Tools

  • Watercolour paper
  • Ruler
  • Bone folder
  • Paper towel
  • Food colouring
  • Hole punch
  • String or thin ribbon

How To

DIY Colour-Burst Gift Tags, Paper Soaking
  • Soak the torn paper pieces in a bowl of water for 2 to 10 minutes.

 

  • Remove a square from the water and place on a piece of paper towel or clean rag. This will soak up excess water. Squeeze a single drop of food colouring into the centre of the tag; the colour should “burst” and spread into a feather-edged circle, slowly growing as the tag dries. Be sure to protect your surface so the dye doesn’t ruin it. If you get dye on your fingers, use tweezers to remove the paper from the water so as not to get the paper dirty. Set tag aside to dry. Repeat for each tag.
  • Once tags are dried, punch a hole into one corner and thread a coordinating string or thin ribbon through and tie to the tag. I used a 1/16” punch to make a smaller hole, but a standard punch will also do. For the string, I went with a fluorescent embroidery floss (DMC E980) and frayed the ends for an extra fun touch.
  • Finally, write a message on your tag — I found metallic gel pens work best — then attach to a present and give!